The all-in-one audio line tester ideal for applications such as live sound, maintenance, installation work - anywhere audio runs down a cable. The Qbox includes a microphone, a speaker, a test tone generator, outputs for standard headphones, a 1/4" jack for line-in or a 2k Ohm (telephone) earpiece out. A handy clip attaches the Qbox to your belt or equipment rack.
Simply generate into or listen to audio at any point in your system from the mics to the power amps to quickly confirm which sections are working and which ones aren't. The Qbox can quick-check dynamic mics and cables without firing up the entire system. Use the bult in mic or tone generator at three different levels for activating a signal path or identifying a specific cable in a pile of cable ends. Powered by a single standard 9V alkaline battery and housed in rugged ABS, the Qbox is light yet able to withstand the wear and tear of fieldwork.
For an instant hands-free intercom, just plug in headphones and hook up one Qbox on each end of a line and use the built-in microphone.
Use it to monitor a standard 3-wire intercom feed - LEDs confirm the presence of intercom or phantom power.
Use it as a squawk box to the stage from the main audio console during set-up. Works in a pinch as a handy, portable, powered monitor too.
The SOURCE section of the Qbox lets you send a tone or the signal from the built-in condenser mic at mic or line levels.
The SPEAKER volume control lets you confirm incoming signals at mic or line level.
A handy MONITOR switch allows the user to listen to a balanced signal or to two separate unbalanced signals on pin 2 or 3 (referenced to pin 1), such as a two-channel intercom.
A SPLIT switch disconnects the two XLRs from each other so tone or internal mic can be sent out of one XLR while you listen to what's coming back on the other. Or connect the XLRs together and "loop-through" or daisy-chain units.
Great essential audio tool
Posted by Unknown on 13th May 2019
The Qbox is great for testing lines/signal paths in live/broadcast environments. It is a "must have" tool if you work in the industry. Despite being made from plastic, it is robust and can withstand the knocks/bumps and scratches that any tool clipped to your belt will receive.
One of the best tools i have
Posted by Derek Philipson on 17th Jan 2018
Working as a technician in rock shows and sports stadiums on both vision and audio this Qbox audio tester would have to be the best tester i have in my tool box. Generating its own tones and the ability to loop test cables or multicores by linking or separating the XLR connectors, adjustable sensitivity, built in high power speaker and a microphone this tester does it all.Built in a robust plastic box too, i had it 3 days dropped it down concrete stairs and it survived. It proved its worth the first day i bought it, and used on a daily basis. A great buy for any audio tech.